RTACS using STFT

[EagleMark]

You can have more than 100% VE... this is what long tube headers can do with NA (I've seen 109% at one of the resonant rpm's)...

if you add boost then as you correct the VE table you will definitely see above 100%.


Take note:
- the tunetool uses cylinder volume to view the VE table when using [%] units;
- the tunetool ignores cylinder volume when using [g*K/kPa] units;

it's up to you... but I would rather use [g*K/kPa].

I am using g*K/kpa, you don't think Im ignoring your advice do you? AFR is also gone, Lambda for wideband and EQ for data. It takes a little while to brake OBDI tuning habits. Like VE can never go over 100%, 90 to 95% injectors go static! Differant worlds in MAF...