After my update, all my PID's are "invalid". Also I'm not getting any readings from the WB
After my update, all my PID's are "invalid". Also I'm not getting any readings from the WB
| 2000 firebird | LQ4 | LS3 top end | 226/231 .600 .602 114 | TCI 3500 | 3" x-pipe under-axle | BMR everything |
You can say that again ! My road to tuning has been a up and down road ! Good Luck.
Scan tool
| 2000 firebird | LQ4 | LS3 top end | 226/231 .600 .602 114 | TCI 3500 | 3" x-pipe under-axle | BMR everything |
Can you post the log file that is causing that
( you may also have to connect the V7 scantool to the PCM one time and do Info->Validate Pids ).
I'm probably jumping the gun a bit in my learning curve, but the question is in my mind now, so.....
I have a couple of SanDisk Ultra SD HC 4Gb cards sitting right here on my desk. Are they compatible with the FlashScan V2?
If not, which brands/sizes are compatible?
CorvetteFlorida.com
2002 Corvette Z06
427 RHS block built by LME
STS rear mounted twin turbos
It nearly died on the operating table, but I'm bringing her back.
Before asking for help, please read this.
CorvetteFlorida.com
2002 Corvette Z06
427 RHS block built by LME
STS rear mounted twin turbos
It nearly died on the operating table, but I'm bringing her back.