We are investigating Wideband O2 and Dynomometer integration for EFILiveV6
We are investigating Wideband O2 and Dynomometer integration for EFILiveV6
wideband would be very useful. I dont trust calculated torque too much but heck.. why not? That may be all it takes to convince somebody to buy this instead of something else
Blacky,
That been done alright here in Australia, if you talk to Andrew of Mainline Dyno's he has included this in he's OBDII software for the GEN3, i can give you phone number if you want.
Also includes torque from the dyno!.
Cheers Drew
wideband integration? what ya mean? ability to monitor wideband sensors with it? you mean I would only need to buy the sensor instead of the entire monitoring package?
If this is what you mean, Quit B4 I wet myself!
98 NBM Z28 M6, all the bolt ons and a TR230/224
What we are designing is the ability for EFILive to merge data from two serial ports. One with the normal PCM data, the other with data from an external device - dyno, wideband or anything really.Originally Posted by TheDogofWar
Data from both streams wil lbe logged in the same log file, charted on the same charts etc.
So you would need a wideband that has a serial data output.
Paul
That what i am using the only problem 1 serial port?.Would have to put EFILiveV6 via a USB connection, then i would have the serial port for the wideband.
http://www.techedge.com.au this is what i am using very accurate, and have compared to a dyno that have a calibrated wideband 02 sensor and i am i within .1-.2 AFR.
Cost is is under the $1000 mark, but where do you get a low cost very accurate wideband 02 wideband sensor from apart from here.
They built a logger for it as well, that currently can plot the following items:
Engine RPM
Vuser1 (0-5v)
Vuser2 (0-5v)
A/F
Worth looking at Blacky!!.
it would be sooooooooooooooooo great if it could log the wideband info from my techedge wideband.
I have the older version that can only log the a/f output but not also grab rpm so if that output could be pumped into efilive that would be great!!!
definetly contact me if you need test subjects.
Heath
Another vote for Techedge. Very nice setup. It would be sweet to have them work together.
Yes you could make the design...
As for the one serial port? you can buy a PCMCIA with 2 serial ports connected and work that way...
If you use the techedge it would be a nice idea and you guys could have a "kit" bundled and stuff.. You could control it through the program... It would be AWESOME!!!
"All that is needed for the triumph of evil is that good men do nothing..."
I would buy it, so when can we expect this integration? that would make tuning muh better, your taking a risk just tuning by stock o2 readings.