Results 1 to 3 of 3

Thread: Anologue AD input mA range

  1. #1
    Lifetime Member
    Join Date
    Feb 2007
    Posts
    594

    Default Anologue AD input mA range

    For programming the 5v output signal of a retransmit device which has two options, 0-20mA or 4-20mA for the input AD 1-4 on the V2, which range should be selected for the V2?

    0-20mA (0-5v) or 4-20mA (1-5v)

    This would be CHT k type retransmit, k type inputs already taken for EGT.
    Last edited by Gelf VXR; June 28th, 2013 at 04:20 PM. Reason: added V range

  2. #2
    Lifetime Member
    Join Date
    Feb 2007
    Posts
    594

    Default

    0 to 5 v, found it in the manual

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,407

    Default

    Cool

Similar Threads

  1. dsp5 out of range
    By tokymon in forum Duramax LLY
    Replies: 2
    Last Post: January 26th, 2012, 06:45 PM
  2. Out of range
    By w/t1500 in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: July 7th, 2011, 11:26 AM
  3. LTFT - range vs + range lean rich question
    By mvvette97 in forum Gen III V8 Specific
    Replies: 1
    Last Post: September 14th, 2009, 05:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •