Log_0029.efi Can you check this log for me? Ive been logging STFT and LTFTs and im a bit confused, if i look at the min and max numbers rather than average it swings from -14% to +14% in some areas. i dont see how this is logical
Log_0029.efi Can you check this log for me? Ive been logging STFT and LTFTs and im a bit confused, if i look at the min and max numbers rather than average it swings from -14% to +14% in some areas. i dont see how this is logical
99 Hugger Orange Z28 - Crate LS6, Bolt-ons, TSP Long Tubes, Borla/QTP, Ram VDS Sintered Iron, Stage 2 T56, Mcleod Master, MWC 9", Strange Pro HD Aluminum, 4.30s, Spool, BMR Subframes - 11.30 @ 121.65
thats not what i am talking about. i made maps for ltfts and stfts based on map and engine rpm. you can view cell counts, average and min/max values. checking the minimum and maximum values my trims vary from -14 to +14 in some areas in a single 20 min long. doesnt seem right for it to be adding 14% in one spot at the beginning of a long and then removing 14% 10 min later.
99 Hugger Orange Z28 - Crate LS6, Bolt-ons, TSP Long Tubes, Borla/QTP, Ram VDS Sintered Iron, Stage 2 T56, Mcleod Master, MWC 9", Strange Pro HD Aluminum, 4.30s, Spool, BMR Subframes - 11.30 @ 121.65
i spent alot of time yesterday adjusting the VE table, i have the maf turned off, and as of last night my "average" logs were looking good, i fine tuned the VE one more time then drove it today and noticed it pulling alot of fuel in certain areas and adding alot of fuel in others. when i checked the average numbers it didnt reflect what i watched as i drove so i checked the min and max values and i was really confused. thats alot of fuel to be removing then adding all in 20 mins of driving
99 Hugger Orange Z28 - Crate LS6, Bolt-ons, TSP Long Tubes, Borla/QTP, Ram VDS Sintered Iron, Stage 2 T56, Mcleod Master, MWC 9", Strange Pro HD Aluminum, 4.30s, Spool, BMR Subframes - 11.30 @ 121.65
Hmmm... a large variation...
If there is that much variation in a single log (a fairly short time period) then there's something going wrong someplace (maybe physically, like airleak or rail pressure)...
Let me look thru Log_0029.efi in more detail.
yeah it didnt make much sense to me either. its no wonder i cant seem to make this thing happy. one thing ive noticed is my check engine light does not work sometimes after flashing my ecm, is that normal?
99 Hugger Orange Z28 - Crate LS6, Bolt-ons, TSP Long Tubes, Borla/QTP, Ram VDS Sintered Iron, Stage 2 T56, Mcleod Master, MWC 9", Strange Pro HD Aluminum, 4.30s, Spool, BMR Subframes - 11.30 @ 121.65