Hi All,
Thanks for the help in advance.
I am trying to do 2 things, first is to verify that my MAF was calibrated correctly and Id like logging help in setting up a logging PID/MAP to.
The second is to be able to make adjustments to anything found to be bad or out of alignment. UNDERSTANDING the effects of adjusting the table 5001
Im a little slow with this so telling me exactly what PID to select and what Map to build will be a great help.
I have a LM2 WB, V2. that im using
I am logging MAFFREQ by DATA-LTFT(gm.LTFTAVERG) 1/
COLUMN-Maf RPM(sae.RPM)-
ROW-MAFFREQ