In the text box (the log of what happens when you flash), can you copy all of it (place cursor in box, do CTRL-A CTRL-C) and paste it here (CTRL-V) in a reply to this thread...
( I want to see the flash portion of the log )
In the text box (the log of what happens when you flash), can you copy all of it (place cursor in box, do CTRL-A CTRL-C) and paste it here (CTRL-V) in a reply to this thread...
( I want to see the flash portion of the log )
If you have any aftermarket radio, alarm system, pull the fuses for them.
2005 1500 HD , Custom OS3 SD tune .
2006 Trailblazer
Dinosaurs and Plants gave their lives so that we may drive , long live fossil fuel .
It is what Taz explained in post #11.
http://forum.efilive.com/showthread....l=1#post195148
Regards
Paul
Before asking for help, please read this.
cos is now loaded and cal is flash in. read the file and the cos is there. adjusted what I needed and now ready to tune.
Be sure to fix B3647 and any out-of-range A00xx cells.
hey joe, i was looking and reading the user note in A0011 and it reads that this is used on (j2,pin56) shouldn't it be C2,pin 56?
I fixed all oor cells along with B3647, hopefully when it warms up a little and stops raining i can start tuning this vega. A 6.0 with a turbo should move it ok..
If you look at the the PCM ... there is "J1 BLUE" cast into the metal body of the PCM, near the BLUE (C1 / J1 / X1) connector. The terms are used interchangeably.