Hi,
I'm currently trying to get my car running on a COS5 system. The operating system is 01290005. It is an ls2 turbo engine with 3.3bar MAP (MAF-less) and using siemens deka 60lb/hr injectors. It also has a cam around the 227/227 at 50, a FAST102 manifold and t/b.
Basically for a base tune, I copied a ve table from another n/a vehicle I did which had a similar cam. I then changed the IFR table to a flat 8.73g/sec. The fuel system is a non-return setup but it is vacuum referenced. With the pumps running and vac hose off, it is 58psi. The MAP sensor scalar is set to 430 and the offset is 10. Everything else in the tune is fairly stock.
Can anybody see a problem with this at all? The car will fire from a crank but stall immediately. It is a transplant, so the VATS is off and there is no BCM.
Thanks