Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS
I use a V1 for BB and ver 7.5 is the latest upgrade. I actually loaded PIDs to black box while connected to PCM. Forgot to mention I use COS 200303. Logs correctly straight to computer but BB logging the same PIDs 60% are showing N/A. Am suspecting a failed cable
Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS
Missed that bit, sorry. I didn't realise a v1.2 could do BBL.
Problem sounds a bit like in this thread: https://forum.efilive.com/showthread...into-flashscan
Wish it where that simple.
Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS
Your PIDs tab shows 19 selected pid and 0 selected channels...?
Try this:
on the FlashScan Control Panel (for V1) do this:
- select Fast (10 f/s),
- set Max Frames Per Log to zero (i.e. unlimited),
- click Validate;
- follow the instructions it tells you (it will tell you to connect V1 to vehicle and let it validate, and then to bring it back to PC).
Followed our instructions up to validate, was warned all log files would be erased, clicked yes to continue and was told Flashcan is now ready for validating pids.No further instructions.
I thought all colored pids where selected. How do you select channels?
Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS
Ok... (it's been a long time since I did V1 BBL)... I sent Paul an email for further guidance
( the channel count should not be showing up as zero )
It's been four years since I tuned my ride. Fell into a brand new hole here. Flashscan control panel reports 1 total log file plus time/log @ 01:13:38 and total time @ 01:13:38. Looks like its gorged.
Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS