Use the USB2 port (you can configure the USB3 port to be USB2)... and use the older USB driver (Start->All Programs->EFILive->V8->USB Driver Manager)
Use the USB2 port (you can configure the USB3 port to be USB2)... and use the older USB driver (Start->All Programs->EFILive->V8->USB Driver Manager)
ok , new news , im dropping out on my scanner now , like every 30 seconds on every computer I have 4 of them all configured the same , this is very frustrating , if I unplug it from the usb port it will come back for 30 seconds and the worst part is im right in the middle of a file a very important one , joe thanks but im not sure what driver to use there are three choices ,,,, im on windows 8
thanks guys
Jim
tried all drives none work correctly
Use driver 2.2.4.
Set your USB ports to 2.0 (not 3.0).
all of the other computers are and none of them worked ? stumped joe
You're logging with the V7 scantool and after 30 seconds it drops out of logging...?
In scantool, go Edit->Properties->Logging, and set "Frames (x1000)" to 50 or 100 (so the log time goes greater than 1 hour)... click Ok and restart the scantool.
kool i will try that , i was told the v8 was not ready so i am on v7 thanks joe