Aem failsafe gauge not serial

[Slowrc]

COOL , Thanks guys!!!

[Slowrc]

Thanks again guys! It is up and logging. However , I am somewhat fuzzy on which map to use. I have always used afr on my serial lm1/lc1. The lambda looks nice. Just want to make sure my copy and paste works correctly. Any tips to stay on the right track?
THANKS

guessing BENW02(AVERAGE) is what map I need to log for my fuel corrections???

[joecar]

Sorry I had a problem with my internet connection, I just got it fixed...

[joecar]

Thanks again guys! It is up and logging. However , I am somewhat fuzzy on which map to use. I have always used afr on my serial lm1/lc1. The lambda looks nice. Just want to make sure my copy and paste works correctly. Any tips to stay on the right track?
THANKS

guessing BENW02(AVERAGE) is what map I need to log for my fuel corrections???

If you are using only wideband, then use CALC.WO2BEN (average).

If you are using wideband and LTFT, then use CALC.SELBEN (average).

[joecar]

The calc_pids.txt file that Joe posted has been somehow corrupted. I've fixed it and attached it to this post as a zip file.

After unzipping the calc_pids.zip file so that the calc_pids.txt file ends up in the \My Documents\EFILive\V7.5\USer Configuration folder, re-start the V7.5 Scan Tool software and make the following PID selections:
Attachment 17295

Regards
Paul

Thanks Paul

I edited that calc_pids.txt from my MacBook and it looks like TextEdit thought it was a formatted file (even tho it is supposed to treat .txt as plain text)...

(and then my internet connection failed when I was trying to post an unformatted file)

[Slowrc]

Really appreciate you guys!!! Logged t hi morning to work . Worked great.