So I attempted some black box logging after buying flashscan v2. Everything seemed okay and all data was logging. After I stopped the car and drove it again about an hour later it started to log but the everything under the tune system stopped logging. Any ideas? User error?
I'm using the tune that came with the car so please excuse how off it is. The first thing I changed was the IFR table because it was way off. So here's what I did.
1. connected flashscan to laptop and car
2. turned the key
3. flashed the new tune with v8
4. Disconnected everything
5. started the vehicle
6. connected the FS to the car and serial wideband
7. began logging
8. drove
9. turned car off
10. turning car on and continued to drive
11. parked, cut ignition, saved log.
Any light shed on this is appreciated. I have attached the log