Do I have to add these pids to the list ? if so I get error :-
If I add anyway, it lists it with the red cross through it:-
A bit lost..........
Do I have to add these pids to the list ? if so I get error :-
If I add anyway, it lists it with the red cross through it:-
A bit lost..........
UK spec 2009 HSV VXR8 6.2 LS3, E38, HeartBeat Supercharger running ~9psi,1 7/8" long tubes, cat back exhaust.
Upgraded cam and springs of unknown specification, all I know is, it's a small cam with no overlap, suits the s/c.
ATI damper, LS9 twin plate clutch, 548rwhp. twin PLX widebands to twin gauges.
Currently running dismal HPTuners....NOW DUMPED !, Completed migration to EFIlive and slowly mapping it in.
628rwhp.....with a lot of tuner help
I don't remember from your other thread... do you have an LS1B or an E38...?
Whenever you see a red X thru a pid on the PIDs tab, on that pid do rightclick->More Info to see why.
I'll switch to my original thread https://forum.efilive.com/showthread...L-Heartbeat-sc I don't want to clutter this one further.Originally Posted by joecar
UK spec 2009 HSV VXR8 6.2 LS3, E38, HeartBeat Supercharger running ~9psi,1 7/8" long tubes, cat back exhaust.
Upgraded cam and springs of unknown specification, all I know is, it's a small cam with no overlap, suits the s/c.
ATI damper, LS9 twin plate clutch, 548rwhp. twin PLX widebands to twin gauges.
Currently running dismal HPTuners....NOW DUMPED !, Completed migration to EFIlive and slowly mapping it in.
628rwhp.....with a lot of tuner help
Hello . Doez anybody can help me with dump of the pic microcontroller inside or some schematics for plx v3 ? Thank you verry much . Also closer picture with all components it will be helpful thank you .
Posting Permissions
Reply With Quote