Both build 308 and 309 have date of 29th May 2014
Both build 308 and 309 have date of 29th May 2014
2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop
I don't know what to say Izaks, the E8 files have not been altered at all in RC2 from what has been there for a long time. The actual patch data hasn't changed since 2009.
Are you able to log the Ethanol sensor status (percentage) when changing the switch to see that it is changing? The timing maps are not part of the upgrade patch, they are just looking at the reported E85 %.
I no longer monitor the forum, please either post your question or create a support ticket.
Started from scratch with the standard OS, did the upgrade and the timing is always being subtracted whether the switch is on or off (E85 shows as 85% with switch activated, and 0% when off)
This was with build 309.
Can't find the original logs where it worked, as it was at least 6 months ago.
I will try in out on another car and see if I can get closer to the cause.
2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop
I post rarely but read quite often to keep on top of what's going on with updates. My V2 Bootblock/Firmware/Software is listed below and would like to know if there are any other steps involved with updating my V2. Should I update incrementally or can I update to the current software and be OK, any input is appreciated.
Current Boootblock/Firmware/Software
Model-FSV2
Bootblock-2.07.07 February 07, 2014
Firmware-2.07.64 July 19, 2014
Thanks,
Mike
You can update to the latest stable release, available here: http://www.efilive.com/latest/cat/download-efilive
You don't need to install any intermediate releases, just the most recent one.
You don't need to uninstall first, you can just install over the existing installation.
Regards
Paul
Before asking for help, please read this.
Thanks, I'll give it whirl tomorrow morning.
~Mike~
2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop