I already posted this on LS1tech so I apologize for those who are seeing this as a duplicate....

My WOT shift settings are set as follows:

Shift....RPM.....Speed
1-2......5700....55.0
2-3......5700....95.0
3-4......5700....145.0

I have logged two runs and I reach both RPM and MPH shift points and the PCM still is not commanding a shift. I have a log showing 63 mph, 6300 RPM in 1st, scan tool shows 1st gear commanded still, and I have a log showing 104 mph, 6150 RPM in 2nd and scan tool shows 2nd gear commanded. What's the deal?