Quote Originally Posted by 98camaro408 View Post
so I just looked on the efilive help tutorial on how to create calcpids and I don't fully understand how to do it. I think I will try setting my 3601 back to 14.7 and see what happens, I have my lc1 display set to show afr based on e85 stoich so if it gets crazy I'll just shut it down, plus I log in lambda anyways so I should see it on there as well.
Do this: set B3601 to 9.7 ( there are kits to measure alcohol % content in gasoline, then you can cross-reference it to the stoich AFR to use).

Then let's take a look at your calc_pids.txt file, post it here, it's located under c:\user\<you>\Documents\EFILive\V7.5\User Configuration.