Results 1 to 10 of 71

Thread: lc1 BEN factor for auto ve leaning out afr

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Junior Member
    Join Date
    Sep 2017
    Posts
    31

    Default

    here is the tune where I changed my afr to 14.7 but never got to run it due to technical difficulties. I should have made every change according to the auto ve tutorial. I think when I ran this tune with my 9.765 stoich it ran decent. according to the tutorial I had to add 15% fuel to the table but the car wouldn't even start it was so rich, I ended up backing off the fueling around 30% ( on the backup ve) to get my idle afr okay and went from there. I'm not sure if i mentioned this but this is for a 98 camaro so I have to tune everything with the backup table and I copied my high octane table and pasted it into my low octane table.

Similar Threads

  1. V8 Scan - Calculated Ben factor
    By Tre-Cool in forum Tutorials
    Replies: 7
    Last Post: September 12th, 2017, 06:34 PM
  2. Replies: 30
    Last Post: April 8th, 2017, 10:59 AM
  3. Ben Factor Question
    By EVI in forum E37, E38 & E67 PFI ECM's
    Replies: 18
    Last Post: March 17th, 2010, 11:01 PM
  4. Auto VE Ben Factor
    By shane in forum Gen IV V8 Specific
    Replies: 2
    Last Post: June 20th, 2008, 11:34 AM
  5. Logging BEN factor with March 20th Beta?
    By Goldfinger911 in forum FlashScan V2 BB Logging
    Replies: 5
    Last Post: March 23rd, 2008, 06:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •