depending on rim size chosen it could be a different part calibration number. nothing to worry about generally.
depending on rim size chosen it could be a different part calibration number. nothing to worry about generally.
The main software calibration number is different also? I can't seem to find anything anywhere that's going to let me edit this thing.
You can't edit the HPT Custom OS based file - last 4 digits 0233, so you will need to find an equivalent EFILive .ctz or .tun file - which were available on tunefiledepot.com but it appears to have gone missing, so try:
https://www.dropbox.com/sh/4ydh5wltk...s4SRJ9NGa?dl=0
You really need the 12647990 OS/main calibration number for your model or 12653249 as TreCool got from TIS. Looks like 12647990 was updated to 12653249.
Thanks for the info,I downloaded all I could find last night so I will go through them and see if I can find a suitable one.
It's a 6spd manual mate
2011 Holden Commodore Utility Manual L98 6.0 Litre (12639270).tun
Attached is a 2011 Ute M6 tune
Ok thanks,I think I downloaded that one last night too. Not too sure of the difference but I will give it a go,cheers.
I tried to do a full flash with the 2011 .tun but it said it was an incompatable OS so I tried the one pictured above and it took it. It idles better now but obviously I have alot of reading/learning ahead of me before I go too mad.Will plumb in a wideband now and see what I can mess up lol.