Innovate ECF-1 Ethanol Advance Gauge

[Age08]

Can the Innovate ECF-1 Ethanol/wide-band 02/ fuel pressure talk to the Flashscan V2 using the serial port the same as the LM-1 for getting Wideband 02 Data?
Is it possible to gather other data off of the innovate products through serial to Flashscan v2?

[joecar]

It probably can... can you point me to the ECF-1 user manual pdf.

[Age08]

http://www.innovatemotorsports.com/s...CF1_Manual.pdf

I know under Devices/F8:Serail I/O you would select wide band type: which lists Innovate(LC1,LM1,LM2)

It would be neat if you could also get the other data off of this gauge through serial like the ethanol %, Fuel pressure, fuel temperature.

[Age08]

So this gauge does work for the serial communication for the Wide band reading on the Flashscan V2 with the innovate wide band selected on setup.

[joecar]

So this gauge does work for the serial communication for the Wide band reading on the Flashscan V2 with the innovate wide band selected on setup.

You tried it...? Good job

Innovate typically make all their stuff compatible.