Results 1 to 6 of 6

Thread: E38 a/c disable/enable rpm

  1. #1
    Member
    Join Date
    Feb 2019
    Posts
    87

    Default E38 a/c disable/enable rpm

    I have a 2010 camaro ss E38 ecm.
    Whats your take on disabling the compressor at higher engine RPM's?
    Does the tables in Systems/AC params G0103/G0104 work?
    If so, which pin on J1/J2 would connect to the compressor thru a relay?

    I am using a VA a/c system with a trinary switch to control the fans and would add another to control the compressor rpm on/off?
    If that works!

    Thanks, Chuck

  2. #2
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    is this on a custom swap?

  3. #3
    Member
    Join Date
    Feb 2019
    Posts
    87

    Default

    Yes...It's in a 55 Chevy

  4. #4
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    Quote Originally Posted by 5557nut View Post
    Yes...It's in a 55 Chevy
    E38 will not be able to control AC compressor by itself, it needs can data message to activate it, you need BCM and AC controls, there is a company that sells a module to produce this signal.
    If you wire the AC pressure sensor, it may activate FANS when needed.
    why not use ECM to control Fans?

  5. #5
    Member
    Join Date
    Feb 2019
    Posts
    87

    Default

    Yes I am using the ecm for fans. I miss-spoke. I meant using to trinary to control compressor.
    It appears the settings in the ecm for ac rpm is non-functional.
    I guess I'll have to remember to turn off the ac if I do burnouts.
    It may not be critical to be concerned about compressor rpm since my Sanden SD7B10 is 6500 constant and 9300 downshift.
    I guess GM quit using that control like the LS1 when they started using control modules to consolidate wiring.
    Thanks for helping out.
    LS3 Manual 6 spd E38 os:12633056
    Texas Speed 1 7/8" headers w/3" exhaust
    Texas Speed cam 229/236 .629/.615 112 LSA
    Hi-Ram intake stock injectors 90mmTB

  6. #6
    Lifetime Member
    Join Date
    Nov 2014
    Posts
    206

    Default

    not sure i understand. will a/c control (g0101-6) work on a 07 ls7 c6z06 or not?

Similar Threads

  1. missing dtc enable/disable
    By mrrattle in forum Cummins 6.7L
    Replies: 9
    Last Post: February 27th, 2020, 06:16 PM
  2. Idle spark enable/disable by VSS?
    By DrX in forum Gen III V8 Specific
    Replies: 3
    Last Post: July 25th, 2011, 02:19 PM
  3. Tweaking the 2010 camaro air conditioning enable/disable Parameters ?
    By 2010 Bumblebee in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: May 5th, 2010, 05:39 AM
  4. B4206 disable or enable during AutoVE tunning?
    By BlackGMC in forum Gen III V8 Specific
    Replies: 2
    Last Post: October 10th, 2007, 10:40 AM
  5. What rpm to enable LTFT?
    By Rich in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: September 19th, 2005, 05:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •