EFILive Flash Scan V2 Black Box Help

[waggz]

oh, from the pid list above, do this:

remove these pids:
GM.TCCSLIP
GM.TRQENG

add these pids:
GM.IBPW1
GM.IBPW2

I'm not sure on the model, been in the car for a while. Right now the wideband isn't being plugged in to the flashscan, no hook up for it from the wideband. I'll have to look and see if I'm wrong there.

I,ll swap out these pids tonight when I try to make it all happen

[waggz]

The AEM wideband has a orange connector with just two wires in the connector. Where do I plug that into the flashscan?

[joecar]

The AEM wideband has a orange connector with just two wires in the connector. Where do I plug that into the flashscan?

Turn your FSV2 over and look at the back of it...

along the bottom edge, see the long/narrow orange socket...
on the label next to this socket, look for AD1+ and AD1-

wideband 0-5V signal connects to AD1+
wideband signal ground connects to AD1-


FSV2 analog socket front view.png

FSV2 analog socket rear view.jpg

[waggz]

Turn your FSV2 over and look at the back of it...

on the long/narrow orange connector label, look for AD1+ and AD1-1

wideband 0-5V signal connects to AD1+
wideband signal ground connects to AD1-

sent you a text, going to need more help than i thought.

[joecar]

I edit my post above, I made it more specific, added a pic.

[joecar]

I haven't received text or pm yet...

[waggz]

strange, just sent you an e-mail with my number in cause there was an issue

[ND2RACE]

Wow I don't get on this forum much anymore as I really only deal with the same old stuff, and then I find my buddy asking about this stuff.

For the record, it's set up on COS 5, I set it up and tuned it for him. I hadn't used BBL really at all, so I guess that's what he was trying to figure out. We did get it working. Good to know this forum is still a good working place for information unlike so many other forums at this point.

[joecar]

I'm sorry, I did not see any emails (my email provider blocks @gmail and @yahoo)...

it is easier for me if you post pics and files here.