Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: V1 stopped letting me flash my pcm

  1. #1
    New Member
    Join Date
    Jun 2017
    Posts
    5

    Default V1 stopped letting me flash my pcm

    Hey Paul,
    Not sure what is happening with my v1.
    It was working fine aND went out last night to make a change and got a popup saying it is scan only and to upgrade to scan and tune.

    License file is the one you had sent me a long time ago and was working with the latest version of efilive.
    Nothing changed, maybe a windows update.
    Strange since I've been using this laptop for flashing for years, and even flashed a short time ago. Just out of the blue it says I have scan only.

    I can read the pcm and save to a file no problem, it comes up with no errors connecting with the scanner and tuner, and then run either the test or flash I get the popup.

    Any help would be appreciated.
    Thanks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,407

    Default

    Go Help->Register EFILive and post a screenshot.

    ~ posted by phone ~

  3. #3
    New Member
    Join Date
    Jun 2017
    Posts
    5

    Default

    Click image for larger version. 

Name:	EFILIVE-REGISTER-SCREEN.png 
Views:	443 
Size:	34.4 KB 
ID:	21139Click image for larger version. 

Name:	EFILIVE-LICENSING.png 
Views:	462 
Size:	17.8 KB 
ID:	21140
    Quote Originally Posted by joecar View Post
    Go Help->Register EFILive and post a screenshot.

    ~ posted by phone ~
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	EFILIVE-REGISTER-SCREEN.png 
Views:	417 
Size:	84.8 KB 
ID:	21137   Click image for larger version. 

Name:	EFILIVE-LICENSING.png 
Views:	410 
Size:	64.9 KB 
ID:	21138  
    Last edited by Ulosst; June 5th, 2017 at 11:50 AM.

  4. #4
    New Member
    Join Date
    Jun 2017
    Posts
    5

    Default

    0:55:27.560: Scanning for EFILive FlashScan V1 USB
    20:55:27.575: Autodetect interface ...
    20:55:27.638: Interface firmware version: 1.2.17
    20:55:27.653: Connection to [FSP] interface is OK
    20:55:27.653: Current protocol set to: "SAE J1850 VPW"
    20:55:27.653: Autodetect PCM...
    20:55:27.716: Connection to PCM is OK
    20:55:27.716: Current protocol: "SAE J1850 VPW"
    20:55:27.762: Interface firmware model: FSP
    20:55:27.778: Interface firmware version: 1.2.17
    20:55:27.794: Interface firmware date: Jan 18, 2005
    20:55:27.825: FlashScan serial number: 003480582106
    20:55:27.934: Getting status...
    20:55:27.981: Status: OK.
    20:55:44.720: Disconnecting ...
    20:55:44.735: Disconnected
    20:55:45.453: Scanning for EFILive FlashScan V1 USB
    20:55:45.468: Autodetect interface ...
    20:55:45.531: Interface firmware version: 1.2.17
    20:55:45.546: Connection to [FSP] interface is OK
    20:55:45.578: Interface firmware model: FSP
    20:55:45.609: Interface firmware version: 1.2.17
    20:55:45.624: Interface firmware date: Jan 18, 2005
    20:55:45.656: FlashScan serial number: 003480582106
    20:55:45.671: Disconnecting ...
    20:55:45.702: Disconnected

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,542

    Default

    Quote Originally Posted by Ulosst View Post
    Hey Paul,
    Not sure what is happening with my v1.
    It was working fine aND went out last night to make a change and got a popup saying it is scan only and to upgrade to scan and tune.

    License file is the one you had sent me a long time ago and was working with the latest version of efilive.
    Nothing changed, maybe a windows update.
    Strange since I've been using this laptop for flashing for years, and even flashed a short time ago. Just out of the blue it says I have scan only.

    I can read the pcm and save to a file no problem, it comes up with no errors connecting with the scanner and tuner, and then run either the test or flash I get the popup.

    Any help would be appreciated.
    Thanks
    The "Personal Scan and Tune" license has been discontinued.
    A free upgrade to Commercial Scan and Tune is available. Send your serial number to me at paul@efilive.com and I'll email back the upgrade code.

    Regards
    Paul
    Before asking for help, please read this.

  6. #6
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,542

    Default

    Don't worry about sending an email, I obtained your serial number from the traces above.
    I have emailed you an activation code to upgrade your V1 to a Commercial Scan and Tune.

    Regards
    Paul
    Before asking for help, please read this.

  7. #7
    New Member
    Join Date
    Jun 2017
    Posts
    5

    Default

    Thanks Paul, just sent via email.
    Derrick

  8. #8
    New Member
    Join Date
    Jun 2017
    Posts
    5

    Default

    working now, thx

  9. #9
    New Member
    Join Date
    Jan 2020
    Posts
    3

    Default

    I know this is an old post, but I'm in a similar place. Upgraded to Commercial, registered product, and flash still fails. Here is what I see:

    Status shows a green check, so I selected Test for the first time.

    It ran through Simulate ECM memory erase
    Then Simulate reflash and 2K of 224K
    Reflash failed ... aborting
    Total time 00:11
    Data compressed 29.2%
    Clear emission related DICs
    FSP interface okay
    Auto detect PCM
    PCM not detected


    Help!

  10. #10
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,542

    Default

    Quote Originally Posted by Loader. View Post
    I know this is an old post, but I'm in a similar place. Upgraded to Commercial, registered product, and flash still fails. Here is what I see:

    Status shows a green check, so I selected Test for the first time.

    It ran through Simulate ECM memory erase
    Then Simulate reflash and 2K of 224K
    Reflash failed ... aborting
    Total time 00:11
    Data compressed 29.2%
    Clear emission related DICs
    FSP interface okay
    Auto detect PCM
    PCM not detected


    Help!
    What PCM type are you using?
    Can you check to see if a trace file was created in the folder \Documents\EFILive\V7.5\Bug Reports. The trace file will be named something like "20190926_120523_download.blx"
    Where the numbers refer to the date/time that the trace file was created.
    If the trace file exists, please email it to me paul@efilive.com.

    Are you able to log data from the PCM - i.e. do any communications between FlashScan and the PCM work?

    Regards
    Paul
    Before asking for help, please read this.

Page 1 of 2 12 LastLast

Similar Threads

  1. Random lean spikes after letting off throttle
    By ferocity02 in forum Gen III V8 Specific
    Replies: 4
    Last Post: April 2nd, 2014, 04:22 AM
  2. help. stopped during flash locked ECM
    By SGFastMax in forum Duramax LB7
    Replies: 0
    Last Post: October 29th, 2010, 03:33 PM
  3. PCM Flash to Grand-AM Cup PCM
    By Rusty in forum Gen III V8 Specific
    Replies: 36
    Last Post: January 5th, 2009, 08:58 PM
  4. Knock when letting off throttle.
    By dbaxter_ss in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 6th, 2005, 04:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •