I guess I'm a little slow...What I have...just to make sure I get this right:This will get you measured AFR, EQ ratio, and lambda from your wideband in your log.
There is a serial cable(db9) that connects to the out connector on DLG-1
There is a serial cable (db9) with Flashscan that connects to RJ45 Flashscan port
Both cables are female...the adapter is male/female...now what?
The null modem adapter connects between the two
Then flash will see both LC-2 wideband sensors?
I pick the PID's in ScanV8 along with the other suggested PID's from you and Paul?
While I am connected to e38 with V8?