Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: E38 IVT table required

  1. #11
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    950

    Default

    Yep, got the cax file and it works. I loaded up a tune for that os and loaded up the modified one I did with hpt and it read the correct values. (3.96 instead of 7.92)

    This will come in real handy when I setup flex fuel for my brothers car which will be running 100lb injectors.

  2. #12
    Junior Member
    Join Date
    Jan 2013
    Posts
    37

    Default

    can you share the file for others to leverage?
    i just bought credits to tune a 08 vette and now it looks like i need to use HPT because they have the ivt table for proper injector scaling.

    its unfortunate i had to buy hpt because they have supported newer gm gas vehicles so much better than efilive even though efilive has the superior platform.

  3. #13
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    950

    Default

    this is for 7.5, you will need to save into new file and put in the required folder location.
    OS-12617631

    [TU0049]
    ; Description
    ; ---------------------------------------------------------------------------------------------------------------------------------
    DESC.001 = IVT Weighting Coefficient - AFR Term.
    DESC.002 =
    DESC.003 = Referenced to the Ethanol % of the gasoline being used.
    DESC.004 =
    DESC.005 =
    ;
    ;
    ; Seg Caption Major Minor Vis Dis 2D Grp
    ; --- --------------------------------------- --------------------------- ---------------- --- --- -- ---
    VIEW = 2 "IVT Weighting Coefficient - AFR Term" "Fuel" "General" 2 2 0 0
    ;
    ; Address(es) BitOff Bits Typ Inv
    ; -------------------------------- ------ ---- --- ---
    ADDR = 1E5E9C 0 16 UNM 0
    ;
    ; Units Factor Offset Prec MinLimit MaxLimit MinUser MaxUser
    ; ------------------------ -------------- ------ ---- -------- -------- -------- --------
    SI_SLOT = Factor 0.003906309 0 2 -128 128 -128 128
    IM_SLOT = Factor 0.003906309 0 2 -128 128 -128 128
    ;
    ; Body Col Row
    ; -------------- -------------- --------------
    ULABELS = . . .
    ;
    ; Enumerations
    ; -------------------------------------------------------------------
    SI_ENUM = .
    IM_ENUM = .
    ;
    ; Units Labels
    ; ---------------- -----------------------------------------------------
    SI_COL = Factor """AFR Term"""
    IM_COL = Factor """AFR Term"""
    ;
    SI_ROW = Ethanol% "0,10,20,50,80"
    IM_ROW = Ethanol% "0,10,20,50,80"
    ;================================================= ================================================== =========================================

  4. #14
    Junior Member
    Join Date
    Jan 2013
    Posts
    37

    Default

    that worked, thank you so much

Page 2 of 2 FirstFirst 12

Similar Threads

  1. E38 and T43 stock files required.
    By TuneMaster in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: September 18th, 2014, 11:35 PM
  2. No A/C torque reduction table in E38 tune? B4358 spark table?
    By Mean Green Z28 in forum E37, E38 & E67 PFI ECM's
    Replies: 10
    Last Post: June 19th, 2014, 12:30 AM
  3. Minimum Sensors required on an E38 (BBC)
    By NateD4 in forum Petrol / Gas
    Replies: 9
    Last Post: July 21st, 2011, 06:55 AM
  4. 2009 E38 & E67, software update required
    By GMPX in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: January 15th, 2009, 04:55 PM
  5. IVT..........Let's talk.........
    By Redline Motorsports in forum Gen IV V8 Specific
    Replies: 7
    Last Post: December 17th, 2007, 02:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •