Results 1 to 1 of 1

Thread: LS3 swap knock sensor functionality

  1. #1
    New Member
    Join Date
    Mar 2024
    Posts
    1

    Default LS3 swap knock sensor functionality

    A friend of mine swapped a forged LS3 with ported heads and a G6X3 (car SCREAMS now...very very nice combo) into his 2000 Trans Am. He's got the knock sensors plugged in with a conversion harness, and they appear to be talking, but I never see ANY knock retard at all...I don't think it's possible since I'm still just beginning to dial his cars tune in.

    I searched and found a few posts saying to make them more sensitive (lower the values in the Knock Sensor Level tables I think)...but should I do anything with the Global Gain table?

    I lowered the values in the 2 level tables to ~80% of what they used to be, but still nothing.

    Have any of you guys gone through this...have any advice for me?
    Last edited by allisonbrubaker; March 11th, 2024 at 01:13 PM.

Similar Threads

  1. Knock knock, False knock? LS3 mutant in C5 car LS1 pcm
    By BHC5 in forum Gen III V8 Specific
    Replies: 8
    Last Post: July 6th, 2017, 08:14 AM
  2. Knock Sensor Types - Engine Swap Gen 4 with 411 PCM
    By LastCall in forum Gen III V8 Specific
    Replies: 1
    Last Post: March 21st, 2016, 02:16 PM
  3. LS3 swap, can I tune for LS2-3 knock sensors?
    By Illegal Vette in forum Tips and tricks
    Replies: 1
    Last Post: November 7th, 2015, 09:23 AM
  4. 0411 swap Knock Sensor??
    By bmc1025 in forum Vortec V6/V8 Specific
    Replies: 2
    Last Post: September 11th, 2014, 03:42 PM
  5. Scaling the ls3 map sensor??
    By rpmauto in forum Gen III V8 Specific
    Replies: 0
    Last Post: November 16th, 2012, 06:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •