Hello,
I have a LS1 Auto. The main problem i have i coasting at 40 to 70 km the idle hangs on at around 1100 rpm and the car doesn't slow down. I think it is in the throttle follower but not sure what part requires attention
Any suggestions?
Hello,
I have a LS1 Auto. The main problem i have i coasting at 40 to 70 km the idle hangs on at around 1100 rpm and the car doesn't slow down. I think it is in the throttle follower but not sure what part requires attention
Any suggestions?
Last edited by dianenelson; May 26th, 2024 at 03:15 PM.
- Diane - geometry dash lite
To fix this you will have to do a bit of fudging on a few tables. You need to make sure idle timing gets enabled and create a pocket on idle area so ecm interpolates between 800-1200 cell and stays close to your desired idle coasting speed.
"All that is needed for the triumph of evil is that good men do nothing..."
A lot of the time just disabling the Cracker Tables at lower speeds fixes this issue. Most Stock or smaller Cammed cars this works great on.