Oct 12, 2024, V8.4.63 - Release Candidate 1

[Blacky]

V8.4.63 Release Candidate 1

WARNING for all users:

Tune files saved using the beta software are not backwardly compatible with previous versions of the EFILive software.
Tune files saved using previous versions of the EFILive software are compatible with this beta version.

The method for calling Lua scripts from custom menus has changed, please see \Documents\EFILive\V8\User Defined Menus\SampleCustomMenu.txt for more info.

The current public release is available here.

Full Release Notes:

What's New

Version Numbers:

After installing this release you should have the following software and firmware versions installed:

• EFILive V8 software: V8.4.63
  
• FlashScan/AutoCal V3 Firmware: V3.00.134
  
• FlashScan/AutoCal V2 Firmware: V2.08.212

Download here:

Download V8.4.63_RC1_Setup
Download_V7.5.50_Setup

Known Limitations:

Limitation #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

Limitation #2: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), that are specific to a custom operating system such as DSP2 or DSP5 PIDs when running a stock operating system, the values returned by those DMA PIDs will not contain valid information and should be ignored.
Workaround: Ignore unsupported DMA PIDs.

Known Issues:

Issue #1: Serial wide-band data is not being detected/recorded by V3 devices.
Workaround: Update to firmware version V3.00.134(3) by clicking on this link. You will need to use EFILive Explorer to update the firmware if your device already has firmware V3.00.134 installed.

Regards,
The EFILive Team