Okay, now that I have it clear that 80kPa is atmospheric here in Colorado Springs and 125kPa is the correct reading for 7PSI boost, here is the question:
I have been using two maps to do AutoVE, 1)Map up to 105kPa and 2)Map from 105kPa to 255kPa.
Should I adjust my tuning with AutoVE to think of 80kPa - 125kPa as my boost map? Build my scan boost map to run from 80kPa - 255kPa and use that to paste with labels and multiply my B101 and A0009 tables to flash.
Is that the right idea?
thanks
Lonnie