Table B1118: RPM value is in increments of 200. From 400 to 5200 RPM.
At 3200 RPM
3300
3350
3500
4000
4000
4400
I think it should be 3200, 3400, 3600, 3800, 4000, 4200, or is this what was really read from the ECM?
Table B1118: RPM value is in increments of 200. From 400 to 5200 RPM.
At 3200 RPM
3300
3350
3500
4000
4000
4400
I think it should be 3200, 3400, 3600, 3800, 4000, 4200, or is this what was really read from the ECM?
I know it looks very strange, however, that is the real numbers, it's hardcoded in the ECM, not sure what they were thinking!.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
Ross
I was looking at this table again. The graph plots the change correctly. There are 2 4000 and only one on the graph. Your saying the 2 4000 are hard coded in the ECM?