I just downgraded my firmware back to .57 and it read ok now.
I just downgraded my firmware back to .57 and it read ok now.
Thank you, I'll let Paul know.Originally Posted by Cougar281
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
I did notice that when I read the controller info using "Show PCM Info" with the .58 firmwaqre, the Calibration number was different than the original read. After I downgraded back to .57 the calibration number matched the origial read. Just FYI.
Got the same error and badfile on my 07/LBZ. Should I send the file or you have enough?
07 3500, CC, DRW, LB, 4x4, 486RWHP/909Tq LBZ, McRat EFI Live, SC IV trans (1057), Cogs, sleeves, blocked no finger, PPE race valve, KD dual lift pumps, TxC Fan Damn. 5,000 lb 2004 Arctic Fox 1150 truck camper, 06 Stingray Powerboat 230LX, 23ft, 350 CDI/300hp. Colorado Springs.
Where can I get .57? I just have .58
07 3500, CC, DRW, LB, 4x4, 486RWHP/909Tq LBZ, McRat EFI Live, SC IV trans (1057), Cogs, sleeves, blocked no finger, PPE race valve, KD dual lift pumps, TxC Fan Damn. 5,000 lb 2004 Arctic Fox 1150 truck camper, 06 Stingray Powerboat 230LX, 23ft, 350 CDI/300hp. Colorado Springs.
Here you go... Hope Ross and Paul don't mind.
Thanks!!
07 3500, CC, DRW, LB, 4x4, 486RWHP/909Tq LBZ, McRat EFI Live, SC IV trans (1057), Cogs, sleeves, blocked no finger, PPE race valve, KD dual lift pumps, TxC Fan Damn. 5,000 lb 2004 Arctic Fox 1150 truck camper, 06 Stingray Powerboat 230LX, 23ft, 350 CDI/300hp. Colorado Springs.
That fixed it for me. Got a good trans read with firmware 57!!!
07 3500, CC, DRW, LB, 4x4, 486RWHP/909Tq LBZ, McRat EFI Live, SC IV trans (1057), Cogs, sleeves, blocked no finger, PPE race valve, KD dual lift pumps, TxC Fan Damn. 5,000 lb 2004 Arctic Fox 1150 truck camper, 06 Stingray Powerboat 230LX, 23ft, 350 CDI/300hp. Colorado Springs.
I think you Diesel guys might get away with that firmware version, from memory I think many of the changes Paul made after this version were related to the E38 / E67 gas ECM's.
When we release the update with the fix I would suggest updating to it.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
I cant get this to work.
It says this file is invalid or currupt. where can I download firmware 57?
Posting Permissions
Reply With Quote