Hello all
During a tune write, my power cord to my laptop was removed by a pilgrim. Now I get bootloader rejected with a possible locked ecm. Any suggestions?
Thanks
Hello all
During a tune write, my power cord to my laptop was removed by a pilgrim. Now I get bootloader rejected with a possible locked ecm. Any suggestions?
Thanks
Disconnect battery for about 10-20 minutes.
Originally Posted by floriduramax1
thanks for the reply
i tried but no luck.
thanks again
I had a battery crap out on me during a flash , did as the other guy said , disconnected the battery and the V1 or V2 and after reconnecting the battery and V1 or V2 did full re-flash with stock .tun .
From what I remember reading was it depended when the interruption happened , what segment of the flash it was in . I think the first 4 seconds is the worst or when the red light is lit on the stop light indicator , yellow or green can be recovered from .
Last edited by Chevy366; July 13th, 2007 at 03:08 PM.
2005 1500 HD , Custom OS3 SD tune .
2006 Trailblazer
Dinosaurs and Plants gave their lives so that we may drive , long live fossil fuel .
$FFFF
Put that in as the key and see if that works. If not, you can send me the pcm and i will take a look at it.
"If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."
Hello and thanks for the suggestion.Originally Posted by wait4me
I tried this key with no luck.
I'll look you up for possible mail in repair.
Thanks again.