My EfiLive V2 installation CD didn't come with Cos#5. Where do I download this?
My EfiLive V2 installation CD didn't come with Cos#5. Where do I download this?
See post #218: showthread.php?t=2599&page=22
Those are currently the latest files for COS5.
Joe, thanks for the link.
I'm having a little trouble getting the my 2000 T/A to run. The first thing I did was to upgrade and reflash the 2000 operating system to a stock 2002 version. After I did this I fooled with the "idling" tables to get the car to run (this was a partial success) and eventually I came across a tune located on HoldenCrazy.com which was a '99 migrated to '02 tune. Here are the descriptions and link:
1999 Camaro Coupe 5.7 Litre Manual LS1 PCM 12212156 484,542 Bytes Stock Tune Migrated To 2002 Operating System
http://www.holdencrazy.com/EFILive/T...t/00000020.tun
So I reflashed this new calibration and the car would idle great. Following the COS tutorial, I full-flashed COS#5 then flashed the working calibration file. After I did this I went through the out-of-bounds tables and adjusted them according to the tutorial. Well, needless to say, the car will start and about 3 seconds later will die. Is this a typical problem? I'm very new to tuning of any kind so any insight would be greatly appreciated.
Originally Posted by joecar
Thanks, that fixed it. I didn't miss that in the COS Tutorial did I? Perhaps that step should be added. Now I'm getting somewhere using the RAFID process and I'm starting to have some fun.
It's buried deep inside the COS5 thread: showthread.php?t=2599
Last edited by joecar; July 19th, 2007 at 02:35 PM.
It really needs to be collected and organized into the COS tutorial pdf.