Howard got me set up w/ my head cam, and now I want to play more with COS5.
How do I estimate what I need for the VE multiplier if I want say 11.8 for my AFR above 3000 RPM...
Basically I start lean (so I want to add some fuel down low 3000's), and as it goes to 6000 RPM it goes rich to 10's and 11's for AFR (so I want to lean it out upper RPM).
I want to make the VE multipliers to try and manage this w/ the nitrous toggle is enabled.
Whats the math to do this? Guessing I use MAF Grams/Sec as a starting point, then refer to the appropiate VE cells? and do what next?