i can send you an injector table file that was made in excel...you will have to know your fuel pressure or you can use your existing *the standard fuel pressure of 43.5 and just change your injector size
basically take a look at your table now..and see what the numbers are..then get this excel sheet to match those numbers by changing your fuel pressure (estimate or actual) and you can change your injectors by some.
For example I have a 2001 trans am ws6 with the stock injectors and I'm going to be changing to 32lb injectors to reduce my duty cycle and have the injectors be more relaxed and not risk them going static, freezing up.
What i did was take a look at my injector table in my car now.....I then got the excel sheet to match the numbers..and since i know my fuel pressure is more than 43.5psi then i left my injectors at 28.8 and changed the fuel pressure up to 48 to get my numbers to match.
if you want to know more i can email you the excel file and we can talk thru email. My email is
sm1218@aol.com
Aren't you going to want to run higher injectors than that??? You typically don't want your injectors going above 80% dutcy cycle