I getting the following error:
http://www.matpa.org/EFILIVE/EFI-Live.htm
Any help is appreciated. Thank you.
I getting the following error:
http://www.matpa.org/EFILIVE/EFI-Live.htm
Any help is appreciated. Thank you.
That error is: "Message too short", which means the data sent to the FlashScan unit form the PC was cut short - for some reason. Possibly due to a fault in the USB connection somewhere.
Can you please click on the status button to find out the boot block version number it MUST be 2.4.10 - if not the unit will need to be returned to EFILive to be updated.
If the boot block version is ok, try these options:
- use a different USB port on you computer.
- use a different USB cable (any standard USB cable will be fine)
- install EFILive on a adifferent compueter and try updating the firmware there.
Regards
Paul
Before asking for help, please read this.
You should also try updating to the latest EFILive software and FlashScan firmware here:
http://forum.efilive.com/showthread.php?t=6646
That update contains a later firmware version: FSProg_V2_4_67.ffw
Regards
Paul
Before asking for help, please read this.
Thank you Paul. Everything seems ok now.Originally Posted by Blacky
I see the update for
http://download2.efilive.com/Softwar...751_027_69.zip
Should I let that go for now until furthur beta testing is done?
Also I notice I have multiple .ffw files in the V7 folder. Should I delete the old one (and/or should it have been done automatically)?
Thanks again,
Chris
Unless you'd like to beta test, I'd stick with the release Paul linked you to
It doesn't matter if those *.ffw files are in that folder or not. They are only used when re-programming the flashScan unit. You can delete them all once you have programmed the latest one into FlashScan.Originally Posted by Leadfoot
Regards
Paul
Before asking for help, please read this.