Before asking for help, please read this.
I thought I had a similar issue, but mine was a typo in my sae_generic.txt file. I put WB02 instead of WBO2 when enabling BEN calulations with the serial WB input.
===
# Innovate LC-1 WBO2
# ========================
*CLC-00-932
V 0.0 5.0 .1 "{EXT.AD1}"
AFR 10.0 20.0 .2 "({EXT.AD1}*3)+7.62"
*CLC-00-933
factor 0.0 2.0 .1 "{EXT.WO2AFR1}/{GM.AFR}"
*CLC-00-934
V 0.0 5.0 .1 "{EXT.AD2}"
AFR 10.0 20.0 .2 "({EXT.AD2}*3)+7.62"
*CLC-00-935
factor 0.0 2.0 .1 "{EXT.WO2AFR2}/{GM.AFR}"
===
2002 WS6, All-Lunati 383 Strok'r @11:1, Cartek Heads, Keith/Ross Racing Custom Cam, Victor Jr., 492whp 457wtq,
Cartek Clutch, 9" Moser w/4.11's, 35 spline Detroit Locker, QA1's, NX, BMR, Tuned w/ EFILive V2 Black Box Logging
Check Out My Latest Tune File: HERE
I have the messed up screen situation happening with Build 46 on any black box log that is older than the current build. Is there a way to fix this on my end.
Oztrack
EFILive Tuning Consultant
Worldwide Remote Tuning Service
2006 NSW Super Street Drag Racing Champion
www.oztrack.com.au
Steve,
Does your scantool screen look like post #66...?
If so then look at post #37, see if that helps: showthread.php?t=7643&page=4
Cheers
Joe
V2 pid/logging viewing interface suggestion:
could make left/right arrows scroll pids up/down by 8 each time.
EDIT: actually, I meant a screenfull each time.
Last edited by joecar; April 1st, 2008 at 07:51 AM.
Scantool suggestion:
when starting the scantool, let it open the last previous opened log file; have an option to enable/disable this.
Before asking for help, please read this.
My flash counters seem to have been corrupted
Calibration on 1536
Full reflash 24064
LOL my cable still has the plastic screen on it and hasnt seen THAT much usage. This is the tuning tool only
Details in cable menu are
Cal only 94
Full Flash 6