Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Best AFR value

  1. April 8th, 2008 #11
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,400

    Default

    A wideband is relatively cheap and does show you what is actually happening.
    Reply With Quote Reply With Quote
  2. April 8th, 2008 #12
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,400

    Default

    Actually you can dial in VE and MAF tables [separately] in CL using LTFT's.

    WOT may be tricky because at WOT positive trims are held but negative trims are zeroed.
    Reply With Quote Reply With Quote
  3. April 8th, 2008 #13
    odd boy
    odd boy is offline
    Lifetime Member
    Join Date
    Apr 2008
    Posts
    469

    Default

    is there a combatable WB with EFILive
    Regards,

    Odd Boy
    Reply With Quote Reply With Quote
  4. April 8th, 2008 #14
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,400

    Default

    EFILive already supports the various most popular widebands...

    For any wideband not supported, EFILive allows you to create a calculated pid for it...
    you just have to know two voltage:AFR points if it's linear, or enough voltage:AFR points to specify a lookup table.
    Reply With Quote Reply With Quote
Page 2 of 2 FirstFirst 12
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules