Not sure what you're actually asking for but I thin k it is one of two things:
1. Ditch FlashScan and allow EFILive to log data directly from the LC-1 or LM-1 wideband controller. (Not going to happen)
or
2. Allow the serial wide band data to be logged by the EFILive Scan tool using FlashScan as a passthrough logger. (Can already be done).
1. Won't happen because EFILive no longer supports serial comms on Windows. Only USB is supported in EFILive.
2. Log the PIDs:
Code:
EXT.WO2ST1 F408 SED-16-900 . External "External Wideband Sensor State"
EXT.WO2ST2 F409 SED-16-900 . External "External Wideband Sensor State"
EXT.WO2LAM1 F40A UNM-16-913 "lambda" External "External Wideband Lambda"
EXT.WO2LAM2 F40B UNM-16-913 "lambda" External "External Wideband Lambda"
EXT.WO2AFR1 F40C UNM-16-914 "AFR" External "External Wideband AFR"
EXT.WO2AFR2 F40D UNM-16-914 "AFR" External "External Wideband AFR"