BBL installer update: June 22, 2008

[Blacky]

Maybe I am an idiot, but what is AutoPIDs in the setup menu? I searched and found nothing and only found it mentioned in the Quick Reference doc.

Set AutoPIDs to YES to cause FlashScan to "remember" the most recently selected PID list and to reselct that same list when you power up FlashScan. It just saves you form having to select PIDs every time you start FlashScan.

Note: it will take slightly longer to startup because it has to read all the PID info into memory. It will also take a little bit longer when selecting a different set of PIDs because it has to save your selection to the Settings.dat file.

Regards
Paul

[fire0021]

Have you tried removing the PID from the appropriate section in the Options.ini file?

Regards
Paul

is tht on the v2 or in efi exsplorer thanks

[Blacky]

Hey, Do I need to point the scan tool to the maps and pids....???

I don't ever remember having to do that before.....

Chuck CoW

This latest install is a little more aggressive when "clearing out old crud" from previous releases. Including resetting the registry settings. I have since changed that to ask the user before clearing the registry settings.

You may need to copy your maps and pids (and other user data) from your saved copy of \My Documents\EFILive\V7.5 back into the newly installed \My Documents\EFILive\V7.5 folders.

Or you may just need to reset the folder locations in the Scan Tool property window on the [Folders] tab page.

Regards
Paul

[Blacky]

is tht on the v2 or in efi exsplorer thanks

The file \Program Files\EFILive\V8.1\Config\Options.ini can be edited (double click on the Options.ini file in Windows explorer) to change the PIDs that are selected. Once you have added/removed the PIDs from the appropriate section* use the EFILive Explorer program to copy the new Options.ini file to the [Config] tab page.

*The appropriate section for LMM is "*PSL_LBZ", it looks like this:

; _________________________________________________________________________
*PSL_LBZ

;Node PIDs (pid1|pid2|...|pidn)  Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
ECM,  BARO
ECM,  ECT
ECM,  FRP_C
ECM,  IAT
ECM,  MAF
ECM,  MAP
ECM,  RPM
ECM,  VSS
ECM,  FRPDES
ECM,  MAIN1Q_M
ECM,  MAIN1T_M
ECM,  MNINJTIM
ECM,  PILOT1Q_M
ECM,  PILOT1T_M
ECM,  TCVPOS
; Allison 6 speed
TCM,  TFT
TCM,  TIS
TCM,  TOS
TCM,  TCCSLIP
TCM,  GEAR
TCM,  TRQENG_B

Regards
Paul

[fire0021]

when i double click on it. it wont open any thing it dosent do any thing ? to clarify i go to config options then click on the lmm and it dosent open any thing from there mabey im doing something wrong ?

[fire0021]

does the v2 need to be connected to do this?

[Blacky]

To edit the Options.ini file, you need to double click it from Windows Explorer (not EFILive Explorer). Once you have edited it and removed the unsupported PID(s), save it and then use EFILive explorer to transfer it to FlashScan's [Config] folder.

Regards
Paul

[rcr1978]

When are we going to get the Ally pids back for the LMM if I connect to the LBZ/LLM TCM all I get is the same pids that are under the LMM controler. Can you guys add a convertor status pid also locked-unlocked or an apply percentage, before when I was able to log some of the 6 speed pids there was no staus just the convertor just slip speed.

Thanks
Robert

[stacks04]

Have you downloaded and installed V7.5.4 from the first post in this thread?
That will provide the V7.04.72 firmware file.

Regards
Paul

i have done this and i tried to update the firmware through the firmware screen and it is telling me i have .05.xx and i have to upgrade through explorer?????????? wtf is explorer. and what have i done???

[joecar]

So far, LS1B is working fine.

I have noted that some of the mode $06 maximum limits change as conditions vary (compare 34.txt and 26.txt).