BBL installer update: June 22, 2008

[vxleather]

You can add the external PIDs that you want/need to log by editing the Options.ini file and then copying it into the [Scan] tab page.

OR

You can edit the FlashSCan setup options:
A/D PIDs: set to Yes to automatically include all external PIDs in ALL logs.
Ser PIDs: set to Yes to automatically include all serial wide band PIDs in ALL logs.
If those settings are set to No, then only the external ans serial PIDs listed in Options.ini will be logged.

Regards
Paul

Thanks Blacky,

I have tried editing the options in the V2 to say yes to those options, when it was pluged into the laptop. But i could not get it to open anything to let me selct yes or no... Does it need to be actually pluged into the PCM.. ??

[Blacky]

Thanks Blacky,

I have tried editing the options in the V2 to say yes to those options, when it was pluged into the laptop. But i could not get it to open anything to let me selct yes or no... Does it need to be actually pluged into the PCM.. ??

When the option is highlighted, use the left/right arrow keys to change the value. Then press Ok to save the changes.
After changing either of those two settings, you need to use the "Select PIDs" option again to reload the PIDs which will take those two settings into account.

Regards
Paul

[vxleather]

ok thanks will give it a try tonight... thanks for all the advice .

[Highlander]

As a suggestion... Give the ability to the program to add calc pids w/o using txt editor...

[Blacky]

As a suggestion... Give the ability to the program to add calc pids w/o using txt editor...

That is very high on the priority list for version 8
Paul

[Kevin Doe]

Maybe I'm out of the loop here, but can you have calc pids displayed on the FlashScan unit itself? I am trying to check instant MPG at different driving conditions, and it would be really nice to check them real time as opposed to downloading the log and looking at it on the laptop.

[TAQuickness]

Somewhere in this forum I believe Paul indicated V2 will only support a limited set of CALC_PID's (i.e. BEN factors). We would need to add the respective CALC_PID's to the log file after uploading them to the PC after the fact.

[Aint Skeered]

just finished testing and I am pleased to say that my v2 is now working great with my lm1 wideband in bbl.

Now if I can fix my issue with the wideband itself I will be doing some ve tuning.

My wideband works but when I go wide open throttle or close to it, my wideband trips out and say's sensor timing error. I think I need to put the copper heat disapater on the o2.

[Chuck CoW]

just finished testing and I am pleased to say that my v2 is now working great with my lm1 wideband in bbl.

Now if I can fix my issue with the wideband itself I will be doing some ve tuning.

My wideband works but when I go wide open throttle or close to it, my wideband trips out and say's sensor timing error. I think I need to put the copper heat disapater on the o2.

When you see the 08 error for sensor timing, it means the sensor heater is dying....(as per innovate tech line)

Ouch...they cost.
Chuck CoW

[joecar]

Paul,

Remember to add any new keys in the quick reference pdf.

Cheers
Joe