Where are we with the whole serial WB topic? Seems like a few on the inside are making it work. Is there a tutorial to set it up? From what I understand it seems like quite a few steps to get it to work.
Where are we?
Howard
Where are we with the whole serial WB topic? Seems like a few on the inside are making it work. Is there a tutorial to set it up? From what I understand it seems like quite a few steps to get it to work.
Where are we?
Howard
I ate my bowl of Aussie rice for dessert, Main course was imported rice...
Hey, I've got the LC1 serial working real nice. If that is what your using, I can give you detailed instructs.
07 Silverado DMax Classic
02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
Old Engine: 1/4mile = 9.6/146 New Engine:?
EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2
COS5/12212156 For 2002 Z06 Manual Vette
Boot block 2.5.08 Apr 25, 2008
Firmware 2.5.17 May 6, 2008
what everyou do do not up grade to the latest version it dont work...
I ate my bowl of Aussie rice for dessert, Main course was imported rice...
The latest versions of the v7.5/v8.1 software with the latest V2 Bootblock and Firmware work together fine for BBL along with serial WB data. There arent too many steps to make it work. Plug in a serial cable for your WB controller (I made mine in 15 min), plug it in, change the V2's settings menu to log serial data (COM in and COM out), choose your controller type, press OK, start logging. My LC1 works great.
v7.5.4 Build 66
v8.1.1 Build 34
V2 Bootblock 2.5.08
V2 Firmware 2.5.20
2002 WS6, All-Lunati 383 Strok'r @11:1, Cartek Heads, Keith/Ross Racing Custom Cam, Victor Jr., 492whp 457wtq,
Cartek Clutch, 9" Moser w/4.11's, 35 spline Detroit Locker, QA1's, NX, BMR, Tuned w/ EFILive V2 Black Box Logging
Check Out My Latest Tune File: HERE
Looks like it has to be either the way plx is sending the info, or the way I have wired it up... Used a V2 that was prevouisly spiking and now fixed still spikes with mine... so it must be the wiring or the info being sent...
the hunt goes on... Still dosnt explain why it works perfectly in Pass threw using iether Serail or Analog and BBL Analog but not in BBl serial..
I ate my bowl of Aussie rice for dessert, Main course was imported rice...