Results 1 to 2 of 2

Thread: what stall to use

  1. September 14th, 2008 #1
    Adam Calley
    Adam Calley is offline
    Member
    Join Date
    Dec 2007
    Posts
    77

    Question what stall to use

    What stall would be the best to use for a 402 stroker in a 98 vette about 600hp?


    98 vette, 402 stroker, comps xtreme Advanced dur-273/279, Dur@.050 224/230 lobe sep:114, Comp 1.75 roller rockers, Patriot stg 3 heads, 90mm fast intake,90mm ls2 tb, 42lb/hr bosh injectors, fast fuel rails w/regulator to 58psi, 160 stat, pacesetter headers, slp cats, magna flow x pipe and mufflers, msd 8245 coils and wires, 3:73 gears, and tring learn how to tune with the v2:
    Reply With Quote Reply With Quote
  2. September 14th, 2008 #2
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Usually the stall rpm is matched to the motor's peak torque rpm.

    A name brand converter vendor can best advise you further.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Do I need to tune my old stall?
    By BowlingSS in forum Gen III V8 Specific
    Replies: 0
    Last Post: April 17th, 2009, 12:44 PM
  2. Locking Up Stall
    By Pharmd2 in forum Gen IV V8 Specific
    Replies: 0
    Last Post: November 18th, 2007, 03:35 PM
  3. new stall will not rev
    By woody69 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 3
    Last Post: January 20th, 2007, 12:31 PM
  4. Stall converter
    By Chevvy SS in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 0
    Last Post: September 30th, 2006, 08:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules