http://www.ls1-australia.com/forum/v...p?f=105&t=4041
Link to attached file
http://www.ls1-australia.com/forum/d...ile.php?id=268
Please delete if not appropriate.
http://www.ls1-australia.com/forum/v...p?f=105&t=4041
Link to attached file
http://www.ls1-australia.com/forum/d...ile.php?id=268
Please delete if not appropriate.
Get EFILive in europe (http://www.efilive.eu).
2007 Escalade ESV L92 6.2L VVT.
2014 VF SV LS3 Maloo.
Can't download those files Ringram.
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Works for me..
Included inline now..
Get EFILive in europe (http://www.efilive.eu).
2007 Escalade ESV L92 6.2L VVT.
2014 VF SV LS3 Maloo.
Says 'not authorized' to download the files. I guess you're a member of that site?
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Affirmative
Get EFILive in europe (http://www.efilive.eu).
2007 Escalade ESV L92 6.2L VVT.
2014 VF SV LS3 Maloo.
hehe. nice. so if I understand this 'patch' correctly, setting it to 'enable' will simply make the lean cruize tables active and workable for all LSx controllers, not just holden ones?
1996 c1500 gen1e 5.7L - the "LS31", 24x CNP, LS2 coils, modified T56, 12200411PCM running COS3, zz4 cam, custom MPFI, etc. coming soon: Twin Turbos
I believe so....but it doesn't work with a COS...so it seems.
Easier to command it in B3647 in that case.
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
thats true, I may try it in 12212156 which is what I'm running.
OT- howard, how does that 12208322 OS work with the L31+411?, I haven't seen much difference between it and 12212156? also, have you been running the Transient fuel .cax? if so, how's it working/any issues with it?
1996 c1500 gen1e 5.7L - the "LS31", 24x CNP, LS2 coils, modified T56, 12200411PCM running COS3, zz4 cam, custom MPFI, etc. coming soon: Twin Turbos
08322 is the base for my tune.
I haven't actually had a chance to implement the transient tables yet (load them into my PCM).
Will be doing so as soon as I can get a little more info on how they work/are adjusted.
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
1996 c1500 gen1e 5.7L - the "LS31", 24x CNP, LS2 coils, modified T56, 12200411PCM running COS3, zz4 cam, custom MPFI, etc. coming soon: Twin Turbos