RoadRunner guts kit?

[mr.prick]

Keep in mind that uploading a file into a RR that is installed into a DIFFERENT type PCM than what the file is intended to be functional within has no hope of working.

Thanks for clarifying this.

EFI Live uses this part of the serial # to determine what types of binaries/tunes it should be allowed to upload. This typically will help to
I don't believe TC has a 'check' in place on the serial # to try and determine PCM type. The 'check' or the refusal to upload/sync from EFI's side can be worked around I believe, contact Paul or Ross for details on this if necessary.

Looks like a little more thought goes into EFILive as opposed to the "other" tuning software that is out there.

[s10mods]

well I finally got my RR updated to 12.14 from this http://forum.efilive.com/showthread.php?t=9613 post number 10 thanks limited cv8r. but I still cant flash my rr with the v6 cal files, I e-mailed craig a few times with no response, If I knew a new rr would let me flash a v6 cal to it I would buy one in a heartbeat, I am driving my car now and it needs a little tuning and I cant even think of the old way.

[N0DIH]

Wish you were close by so we could look at it and see what is up. Mine has done V6 files great from day 1. Did V6 before anything else. I'm puzzled!

[limited cv8r]

These are the serials from two of my RR's -0107051712445267,0206092319290250. One is a 512,one is a 1024. As you can see,like craig stated in an earlier post the first two digits determine how EFILive sees your RR. So what we need is for the check to be removed or able to be bypassed so that we can flash whatever we like into our RR's with EFILive. I guess this can only be done by Ross if he is willing to let EFILive users have some more fun with their software and RR's and hopefully make it a better product.

On a side note if Craig reads this,has there been any work done towards emulating the later model ECM's? e.g E40,E38 etc.

[s10mods]

that would be great, I am using Tuner Cat to try and flash my v6 files in to my RR, but to be able to use EFILive with more than just the 01-02 would be nice too. I wish EFILive would come out with V6 support, that would be sweet.

[s10mods]

Wish you were close by so we could look at it and see what is up. Mine has done V6 files great from day 1. Did V6 before anything else. I'm puzzled!

what version of the RR program are you using? and what version are your vdf's? this is the only other thing I can think of it being, I am now running V12.14 firmware and I have tried to flash it on 3 different computers now with no luck. I can even flash in a 99 truck file, but not a 98, and nothing v6 can I flash in. I e-mailed craig a few times now with no response, I am considring buying another RR and just hope that maybe it's my RR and the new one will accept the file.

[Stealth97]

what version of the RR program are you using? and what version are your vdf's? this is the only other thing I can think of it being, I am now running V12.14 firmware and I have tried to flash it on 3 different computers now with no luck. I can even flash in a 99 truck file, but not a 98, and nothing v6 can I flash in. I e-mailed craig a few times now with no response, I am considring buying another RR and just hope that maybe it's my RR and the new one will accept the file.

I have TC and my RR sitting right here. I'm going to try to flash in a 97 truck file I have. If you post or point me to a post where a V6 file is, I will try to flash it into the RR right now for you. If it works, maybe we can work out a trade. =) Save you $600.

S10mods=John, right? You have my old TC or your brother does.

Eric

[s10mods]

Yea, you sold your old tc to my brother, I'm joe. I think there is a post in this thread that has my v6 file in it, I'm not at home now and am posting from my cell phone.

[mr.prick]

Has anyone installed the RR in a CAN based PCM yet?
Can it be done?

[Stealth97]

Yea, you sold your old tc to my brother, I'm joe. I think there is a post in this thread that has my v6 file in it, I'm not at home now and am posting from my cell phone.

I will try to look around for that file carefully later tonight and report back. I'll find it somewhere.

If I can upload the V6 file into my RR, I'll pay for my end of shipping and send it to you and you send me yours. Just the guts kit so we keep the PCM serial the same I think and we'll just clarify it with Craig Moates that we are swapping RR's. I'll reinstall EFI Live if thats ok with Paul and Blacky so as to not eat a license. As long as nobody gets any feathers ruffled and my RR actually takes a V6 file, it looks like this will get you to where you want to be and you seem a lot further along than I am.

Besides, the only V6 I'd ever install it in would be a 2002 S10 (girlfriends truck) and she won't even let me plug into the OBD II port yet. She is serious with her vehicle (50k mile stock I think ZQ8 package? the lowered non extreme one). Both our trucks are blue. I think I found a keeper! =)

Eric