Is there any way for EFILive to initiate a service fast learn adapt process for the 6L80e?
Is there any way for EFILive to initiate a service fast learn adapt process for the 6L80e?
1995 GMC Yukon 4WD 4DR
5.3 "LMG" engine: E85 with AFM
6L80e 6 speed automatic transmission
T43 & T42 DVT's were added in to the last release.
By the way, how does the Yukon move along with the 5.3L?
I no longer monitor the forum, please either post your question or create a support ticket.
Exellent! I will have to check it out.
Yukon runs great with the 5.3. Very smooth. Wintertime 0-60 time is in the low 6 second range:
http://www.pswired.com/95yukon/performance/LMG0-60.wmv
Still need to build CAN interface module to drive the gauges and send the A/C request message to ECM. Hardware design is coming along but no code has been written yet. Motorola S12X will be used for this.
Runs great on E85 and 87 octane, and gets a solid 18 MPG with my mostly highway driving.
1995 GMC Yukon 4WD 4DR
5.3 "LMG" engine: E85 with AFM
6L80e 6 speed automatic transmission
I'll keep you guys posted. I'm willing to post my PCB design, BOM, and source code, but I won't be building these things.
Plus it's moving very slowly due to no free time...
1995 GMC Yukon 4WD 4DR
5.3 "LMG" engine: E85 with AFM
6L80e 6 speed automatic transmission
1995 GMC Yukon 4WD 4DR
5.3 "LMG" engine: E85 with AFM
6L80e 6 speed automatic transmission