EFILive Version 8 (Black Box Logging) is now available

[swingtan]

Just had a thought.....

The E38 stays "alive" for a long time after ignition off.... if you don;t open the drivers door! I think the time mine kept logging was when the missus went into a shop to buy some stuff while I sat in the car. So the drivers door never opened and all accessories kept running. I bet this is why the ECM didn't stop sending data. In this case, it's actually a good thing as you can log IVT cool down rates etc once the engine has stopped.

[gmh308]

Hi Ian,

Thanks for the detailed write up. It is taking me a while to go through and investigate the points you raised. I'll post my results/updates in this thread. Feel free to post a reminder if I have not posted by end of next week.

Regards
Paul

Hi Paul,

How is this progressing? I noticed that you now have an error message if "duplicate" PIDs are selected.

But....EQ_RAT appears to be missing from the selection listing in Scan and Tune now, and even if it is listed in Options.txt, it does not log, even though it displays on the V2. Doesnt show up in the PID listing in Scan either.

Search party needed?

[Blacky]

Still grinding through the latest firmware update and addressing the issues you raised as I get to them.

I'm buried so deep under the firmware code, no search party would ever find me

Paul

[gmh308]

Still grinding through the latest firmware update and addressing the issues you raised as I get to them.

I'm buried so deep under the firmware code, no search party would ever find me

Paul

No worries Paul. Thanks for the update. Keep at it, you all are doing some great stuff with V2 etc.

"Careflight" at the ready. They helped a couple guys who were deep in croc territory over the weekend (one buried to his neck to keep warm....), so they have some warmed up shovels at the ready and know where to dig....

Cheers, Ian