Page 2 of 8 FirstFirst 1234 ... LastLast
Results 11 to 20 of 71

Thread: Known Issues With Current Public Release

  1. #11
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by Snipesy View Post
    Also would you be willing to add some PIDs if I threw them your way? (so I can bbx log them)
    I can add generic and enhanced PIDs but not DMA PIDs. So let me know whcih PIDs and I'll see if I can get them added.

    Regards
    Paul
    Before asking for help, please read this.

  2. #12
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by Tre-Cool View Post
    i attempted to do some logging today with the v8 scanner with the AEM on an E40 ecu.

    Whenever i attempted to click on the data screen, it would give me a AV error @ address 00965008. read address 00000028.

    Once that came up u clicked ok, then it would come back to infinity. so had to kill program.

    Also got the same error when trying to test a ben pid. except it only came up once. so i could get out of it

    Can you provide a detailed sequence of steps that will reproduce the problem? I tried doing what you explained in the post but I can't get it to fail.
    Regards
    Paul
    Before asking for help, please read this.

  3. #13
    Senior Member
    Join Date
    Dec 2015
    Posts
    126

    Default

    I sent a PM your way with the infos.

  4. #14
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    937

    Default

    Quote Originally Posted by Blacky View Post
    Can you provide a detailed sequence of steps that will reproduce the problem? I tried doing what you explained in the post but I can't get it to fail.
    Regards
    Paul
    I would connect with some pids and start recording. if i clicked on data screen i got the error. if i tried to test a calculated pid. i got the error. Joecar noticed the same thing and mentioned it in a post in the v8 calculated pids thread.

  5. #15
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Tre-Cool is referring to this: V8-Scan-Calculated-Pids~post#29



  6. #16
    Lifetime Member izaks's Avatar
    Join Date
    Aug 2003
    Posts
    352

    Default

    Setting D9602 to ENABLED, disables SPORT SHIFT mode when trans lever is moved to the SPORT position. If you then go into manual mode, it is locked in this mode, even if trans lever is moved back to auto. You have to shift out of drive and then back in to drive to disable manual mode and revert to normal drive mode. Tested on 2011 and 2012 VE.
    Was trying to find what prevents the trans shifting into 6th over +/- 240 when I saw D9602 and tried it to see what it does.
    2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop

  7. #17
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by Tre-Cool View Post
    Did some BBX logging on the E98, is there an update to the sae.map definition still to be done like the v7 software? or will it always max out at 255kpa? (built-in limitation) OR should i be logging something else?
    Just posted a fix for the MAP PID scaling issue. See first post for links.
    Regards
    Paul
    Before asking for help, please read this.

  8. #18
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    937

    Default

    Downloading now. i'll give it a test shortly. Will also test the AEM wideband calculated pids
    Last edited by Tre-Cool; December 22nd, 2016 at 07:27 PM.

  9. #19
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    937

    Default

    Well, the BBX now logs over 255kpa, but now the v7.5 pass-through logger doesn't. lol

    Also noticed that when you do a compare with tunes, you can no longer double click on the item and get taken to the table etc.
    Last edited by Tre-Cool; December 23rd, 2016 at 01:08 AM.

  10. #20
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by Tre-Cool View Post
    Well, the BBX now logs over 255kpa, but now the v7.5 pass-through logger doesn't. lol

    Also noticed that when you do a compare with tunes, you can no longer double click on the item and get taken to the table etc.
    Can you post both logs, the one from bbx and the one from v7 pass-thru?
    Regards
    Paul
    Before asking for help, please read this.

Page 2 of 8 FirstFirst 1234 ... LastLast

Similar Threads

  1. Known issues with the October 2015 Public Pre-Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 14
    Last Post: November 14th, 2015, 09:09 PM
  2. Known issues with the September 2015 Public Pre-Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 4
    Last Post: September 11th, 2015, 09:46 AM
  3. Known issues with June 02, 2015 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 18
    Last Post: July 8th, 2015, 04:07 PM
  4. Known issues with May 01, 2015 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 64
    Last Post: June 2nd, 2015, 09:46 AM
  5. Known issues with April 13, 2015 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 32
    Last Post: April 30th, 2015, 07:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •