The AEM wideband has a orange connector with just two wires in the connector. Where do I plug that into the flashscan?
The AEM wideband has a orange connector with just two wires in the connector. Where do I plug that into the flashscan?
Turn your FSV2 over and look at the back of it...
along the bottom edge, see the long/narrow orange socket...
on the label next to this socket, look for AD1+ and AD1-
wideband 0-5V signal connects to AD1+
wideband signal ground connects to AD1-
FSV2 analog socket front view.png
FSV2 analog socket rear view.jpg
Last edited by joecar; August 23rd, 2018 at 10:47 AM.