Results 1 to 9 of 9

Thread: Stock LS1 with powerdyne 6 psi kit

  1. #1
    Member
    Join Date
    Aug 2008
    Posts
    59

    Default Stock LS1 with powerdyne 6 psi kit

    Ok a friend just bought a 01 SS bone stock with a powerdyne 6psi kit NON-intercooled on it. He brought it straight to me and said fix it. lol Took it for a drive and its not happy at all. Sparks knock bad if you barley get in it. This is my first supercharged car and not sure where to really start. I pulled the tune and someone has been in it before but its not right.
    It came with SVO 42lb injectors, 255 pump, and TR-6 plugs all not installed. I just put them in tonight. Its a suck threw MAFF setup and has NO FMU.. From what i've read i guess thats why they got the 42's and 255 pump. I looked for a good base on holdens site but there isn't one. Could someone set me up with a good base to start off of, i'll include the tune i pulled but i don't know if i need to start from scratch. I'll also include a stock 01 file from holden's site if needed.

    Thanks Brad
    Attached Files Attached Files

  2. #2
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    Looks like a near stock timing table.
    Bad.
    Im no FI expert, but Id be taking timing out from 0.80g/cyl up.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  3. #3
    Senior Member
    Join Date
    Aug 2007
    Posts
    126

    Default

    Do you have a wide band o2? If not get one .

  4. #4
    Member
    Join Date
    Aug 2008
    Posts
    59

    Default

    Quote Originally Posted by chevy052500hd View Post
    Do you have a wide band o2? If not get one .
    Yes i do have a wideband LM-1

    I have done quite a few NA cars but this is my first shot at an FI one.

  5. #5
    Member
    Join Date
    Aug 2008
    Posts
    59

    Default

    Quote Originally Posted by ringram View Post
    Looks like a near stock timing table.
    Bad.
    Im no FI expert, but Id be taking timing out from 0.80g/cyl up.
    Other than the timing tables being near stock how does the rest of it look?

  6. #6
    Senior Member
    Join Date
    Aug 2007
    Posts
    126

    Default

    Here is a tune I whipped up for ya, less timing in high load areas and more full in high load areas approx 10%, caled it for the 42lb injectors too. Should be safe, maybe overly safe. Hard to guess what your engine needs with out a log but this should get ya started. Would be better if your buddy could get a intercooler on there to help with IAT's.

    Good luck,
    Attached Files Attached Files

  7. #7
    Senior Member
    Join Date
    Aug 2007
    Posts
    126

    Default

    may half to turn off map codes p0106 if they set. For being in boost at part throttle. You may also throw a p0101 for the maf sensor and may half to turn that code off too, but drive it and find out.

  8. #8
    Senior Member
    Join Date
    Aug 2007
    Posts
    126

    Default

    Here's an updated tune, forgot that the ls1's are 4bar, and your svo's are rated at 3bar so your 42lbers are actually 49lb injectors on this car. I updated the ifr table for you.
    Attached Files Attached Files
    2005 chevy silverado, duramax tuned with efilive
    1997 Saturn sc2 turbo, tuned with megasquirt on e85
    2000 s-10 turbo'd tuned with efilive on e85

  9. #9
    Member
    Join Date
    Aug 2008
    Posts
    59

    Default

    Ok i played with it and got it running really good. But the only thing i noticed on the wideband is on a decell when i let out of the gas it goes way rich for a few seconds then comes back to normal or untill the defco kicks inl. I'll include both the tune and a datalog. You can see a nice one at frame 1720
    Attached Files Attached Files

Similar Threads

  1. Stock 2.2l 98 S-10
    By trudynosports in forum IL4, 97-01 PCM and 02+ P11 PCM
    Replies: 16
    Last Post: July 6th, 2010, 08:18 AM
  2. Can I get a stock L31 map?
    By Supercharged111 in forum Vortec V6/V8 Specific
    Replies: 4
    Last Post: March 15th, 2009, 05:08 AM
  3. Stock Bin
    By teddyls1 in forum Gen III V8 Specific
    Replies: 2
    Last Post: May 10th, 2008, 04:03 AM
  4. Need stock .bin
    By SSpdDmon in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: September 5th, 2006, 07:25 AM
  5. Is this a stock 02 ZO6 cal?
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: August 15th, 2006, 11:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •