Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: BB logging pids

  1. #1
    Member
    Join Date
    Sep 2007
    Posts
    98

    Default BB logging pids

    How do i seleect wich ones i want to log on the v2 there are alot of pids tht dont come up on the v2 tht i can see when logging with the my lap top Thanks This is alos for a 07.5 lmm

  2. #2
    Member
    Join Date
    Sep 2007
    Posts
    98

    Default

    any one

  3. #3
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config\Options.txt

    this must be edited for the PIDS you want.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    +1.

  5. #5
    Member
    Join Date
    Sep 2007
    Posts
    98

    Default

    Quote Originally Posted by mr.prick View Post
    C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config\Options.txt

    this must be edited for the PIDS you want.

    ok cool tht worked thank you one other question how do i get to read in psi vs kpa some of my pids read in psi and others kpa as well as f vs c temps thanks

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    See the "PCU" section ("From" "To" near the end) of my Options.txt (attached)...

    With those conversion parameters, with each press of the ENTER key, the display of those mentioned pids swaps between metric and imperial.
    Attached Files Attached Files

  7. #7
    Senior Member
    Join Date
    Feb 2008
    Posts
    134

    Default

    Im not understanding the PSL thing.

    Some have 2 PSL #s and some have 3.

    If I create a new Pid selection like balance would It be PSL23 and PSL24 from the default options.txt file?

    I guess I just need a little better explaining of the PSL part, lol.
    12 Second LMM

  8. #8
    Senior Member
    Join Date
    Feb 2008
    Posts
    134

    Default

    Quote Originally Posted by joecar View Post
    See the "PCU" section ("From" "To" near the end) of my Options.txt (attached)...

    With those conversion parameters, with each press of the ENTER key, the display of those mentioned pids swaps between metric and imperial.
    Also, in your conversion, you show to convert *F to *C multiply (factor) 1.80000 and your offset (add) is 3.20000, wouldnt your offset be 32.00000??

    Im confused, lol
    12 Second LMM

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by MMLMM View Post
    Also, in your conversion, you show to convert *F to *C multiply (factor) 1.80000 and your offset (add) is 3.20000, wouldnt your offset be 32.00000??

    Im confused, lol
    The offset is 3.200000E1 which means 3.200000x10^1 which is 32... (En notation means "multiply by 10^n").

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by MMLMM View Post
    Im not understanding the PSL thing.

    Some have 2 PSL #s and some have 3.

    If I create a new Pid selection like balance would It be PSL23 and PSL24 from the default options.txt file?

    I guess I just need a little better explaining of the PSL part, lol.
    The identifiers after the PSL are the positions in the list of pid lists...

    In the attached Options.txt you will see:
    - the first PSL lists PSL_01 and PSL_02 -> refers to rows 1 and 2 in the pid selection list ("LS1A_M" and "LS1A_A");
    - the second PSL lists PSL_03 and PSL_04 -> refers to rows 3 and 4 ("LS1B_M" and "LS1B_A");
    - *PSL,PSL_09,PSL_11,PSL_13 -> refers to rows 9, 11, 13.
    and so on...

    a PSL may be used by 0 or more pid list positions.

    See the comment from the Options.txt file:
    Code:
    ; _________________________________________________________________________
    ;
    ; PID Selection List
    ; ----------------------
    ;
    ; *Section_Names is a comma separated list of indexes from the initial *PID_SELECTIONS section above.
    ;        The XX in PSL_XX matches the entry number in *PID_SECLTEIONS
    ;
    Attached Files Attached Files
    Last edited by joecar; January 17th, 2009 at 06:37 PM.

Page 1 of 2 12 LastLast

Similar Threads

  1. logging pids
    By aaronr in forum Black Box Logging
    Replies: 16
    Last Post: February 18th, 2009, 10:46 AM
  2. Issues logging E38 PIDS
    By thunder550 in forum FlashScan V2 BB Logging
    Replies: 0
    Last Post: April 28th, 2008, 04:52 PM
  3. More PIDs in E67 for BB logging?
    By scdyne in forum Black Box Logging
    Replies: 0
    Last Post: January 30th, 2008, 11:22 AM
  4. Logging E38 Specific PIDS W 08 Z06
    By 02Z06 in forum E37, E38 & E67 PFI ECM's
    Replies: 5
    Last Post: November 12th, 2007, 11:04 PM
  5. Best PIDs for Logging Dry Shots?
    By Beer99C5 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 15
    Last Post: July 23rd, 2006, 05:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •